Features
- Inline Swivels rotating joints provide for minimal friction allowing free movement of hoses and piping in fluid conducting power systems.
- The compact design fits in tight areas.
- Super Swivels one piece barrel and stem with integrated ball bearing race design withstands heavy side loads preventing premature seal wear and leaks.
- This pass-through inline design is the most standard configuration in live swivels.
- Super Swivels connect directly to hose lines without adapters reducing overall costs of hydraulics.
- No Kinks – No Hose Twisting.
Notes
- Super Swivels are not recommended for breathing air/oxygen or steam.
- All swivels have 4 to 1 proof pressure, except 10,000 PSI = 3 to 1 proof pressure.
- Any series stem will fit with the same series body.
Base Material and Plating
- Super Swivels are manufactured from Carbon Steel or 304 and 440C Stainless Steel
- Carbon Steel Zinc (Z) Plating is recommended for non-corrosive applications, i.e. hydraulic, pneumatic, etc.
- Carbon Steel Nickel (NI) Plating is recommended for mildly corrosive environments, i.e. water, mild chemicals, solvents, etc.
Seal Material
- (V) Viton® (Fluorocarbon) – For most petroleum based applications. (-15 deg. F to 250 deg. F)
- (AL) Aflas® (Tetrafluoroethylene-propylene copolymer) – Better resistance to many individual chemicals. For service in high temperature environments. (Low temperature limitations.) (+32 deg. F to 400 deg. F)
- (ETP) Extreme® Viton – High resistance to many individual chemicals. (-6ºF to 437ºF)
Specifications
- Inlet/Outlet: Variable
- Pressure: 4,500 PSI
- Material: Nickel/Aflas